This Article Full Text (PDF) References Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Young, W.-B. Search for Related Content Social Bookmarking                         What's this?

The Effect of Surface Tension on Tow Impregnation of Unidirectional Fibrous Preform in Resin Transfer Molding

Institute of Aeronautics and Astronautics, National Cheng-Kung University, Tainan, Taiwan 70101, Republic of China

Resin transfer molding (RTM) is an efficient technique for fabrication of large polymer composite parts with complicated shapes. The process consists of injecting liquid resin into a mold cavity with preplaced fiber preform. Voids trapped in the composite during the filling stage were believed to be the consequences of the non-uniform micro- and macro-flows in the pore spaces. A two-dimensional flow model is developed to study the impregnation flow in both the micro- and macro-regions during the mold filling process. The capillary force is included in the model to investigate its effect on the micro- and macro-flows. The capillary force is the major cause that results in the leading of the micro-flow for a low filling rate, that cannot be ignored if the analysis of the void formation is to be performed. It is found that mold filling process with capillary number near the value of the critical capillary number is an adequate condition to result in a uniform filling pattern in RTM.

Key Words: RTM • capillary force • surface tension • micro-flow • tow impregnation

Journal of Composite Materials, Vol. 30, No. 11, 1191-1209 (1996)
DOI: 10.1177/002199839603001102


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?

This article has been cited by other articles:

				M. E. Foley and J. W. Gillespie Jr. Modeling the Effect of Fiber Diameter and Fiber Bundle Count on Tow Impregnation during Liquid Molding Processes Journal of Composite Materials, June 1, 2005; 39(12): 1045 - 1065. [Abstract] [PDF]

				H. J. Barraza, Y. K. Hamidib, L. Aktasb,, E. A. O'Rear, and M. C. Altan Porosity Reduction in the High-Speed Processing of Glass-Fiber Composites by Resin Transfer Molding (RTM) Journal of Composite Materials, February 1, 2004; 38(3): 195 - 226. [Abstract] [PDF]

				M. T. Senoguz, F. D. Dungan, A. M. Sastry, and J. T. Klamo Simulations and Experiments on Low-Pressure Permeation of Fabrics: Part II--The Variable Gap Model and Prediction of Permeability Journal of Composite Materials, July 1, 2001; 35(14): 1285 - 1322. [Abstract] [PDF]