This Article Full Text (PDF) References Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Di Scalea, F. L. Articles by Green, R. E. Search for Related Content Social Bookmarking                         What's this?

A Hybrid Non-Contact Ultrasonic System for Sensing Bond Quality in Tow-Placed Thermoplastic Composites

Department of Structural Engineering, M. C. 0085, University of California, San Diego, 9500 Gilman Drive, La Jolla, CA 92093-0085, flanza{at}ucsd.edu

Robert E. Green, Jr.

Center for Nondestructive Evaluation, Materials Science and Engineering Department, The Johns Hopkins University, 102 Maryland Hall, 3400 N. Charles Street, Baltimore, MD 21218

A novel non-contact nondestructive evaluation system is proposed for sensing bond quality in tow-placed graphite/PEEK thermoplastic composites. The inspection tool consists of a hybrid ultrasonic system which employs laser generation of narrow-band surface waves with fiberoptic light delivery, and signal detection by air-coupled transduction. The fiberoptic link enhances flexibility and remoteness of the laser source from the test piece. The system output is not influenced by the poor light reflectivity of the test graphite/PEEK material. Signal narrow-banding by light spatial modulation enhances the measurement sensitivity and avoids detrimental material ablation while allowing control of the surface wave penetration depth. The theory of the laser generation of narrow-band surface waves is reviewed and the generation efficiency as a function of the wave propagation direction in the composite is discussed.

The inspection capabilities of the proposed system are demonstrated by successful detection of a series of subsurface defects in a tow-placed unidirectional AS-4/APC-2 cylinder provided by Boeing Commercial Aircraft. The defects examined include regions of poor consolidation, inter-laminar linear porosity (voids elongated along the fibers with 1.5% volume fraction), and delamination or interlaminar weakness. The ultrasonic inspection unit is non-contact, flexible, light-weight and allows for high inspection rates. These characteristics, coupled with a large signal-to-noise ratio of the measurements, show promises for the use of the proposed sensor in on-line control of the thermoplastic tow-placement process with in situ consolidation.

Key Words: non-contact ultrasonic inspection • ultrasonic surface waves • laser ultrasonics • air-coupled transducers • thermoplastic tow-placement

Journal of Composite Materials, Vol. 34, No. 21, 1860-1880 (2000)
DOI: 10.1106/LM8N-P39H-Y4QR-EWVP


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?