This Article Full Text (PDF) References Alert me when this article is cited Alert me if a correction is posted Citation Map Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Google Scholar Articles by Loos, A. C. Articles by Springer, G. S. Search for Related Content Social Bookmarking                   What's this?

Curing of Epoxy Matrix Composites

Department of Mechanical Engineering and Applied Mechanics The University of Michigan, Ann Arbor, Michigan 48109

George S. Springer

Department of Mechanical Engineering and Applied Mechanics The University of Michigan, Ann Arbor, Michigan 48109

Models were developed which describe the curing process of composites constructed from continuous fiber-reinforced, thermosetting resin matrix prepreg materials. On the basis of the models, a computer code was developed, which for flat-plate composites cured by a specified cure cycle, provides the temperature distribution, the degree of cure of the resin, the resin viscosity inside the composite, the void sizes, the temperatures and pressures inside voids, and the residual stress distribution after the cure. In addition, the computer code can be used to determine the amount of resin flow out of the composite and the resin content of the composite and the bleeder. Tests were performed measuring the temperature distribution in and the resin flow out of composites constructed from Hercules AS/3501-6 graphite epoxy prepreg tape. The data were compared with results calculated with the computer code for the conditions employed in the tests and good agreement was found between the data and the results of the computer code. A parametric study was also performed to illustrate how the model and the associated computer code can be used to determine the appropriate cure cycle for a given application, which results in a composite that is cured uniformly, has a low void content, and is cured in the shortest amount of time.

CiteULike    Connotea    Del.icio.us    Digg    Reddit    Technorati    What's this?

This article has been cited by other articles:

				W.-K. Jung, W.-S. Chu, S.-H. Ahn, and M.-S. Won Measurement and Compensation of Spring-back of a Hybrid Composite Beam Journal of Composite Materials, April 1, 2007; 41(7): 851 - 864. [Abstract] [PDF]

				Y. Li, Z. Zhang, M. Li, and Y. Gu Numerical Simulation of Flow and Compaction During the Cure of Laminated Composites Journal of Reinforced Plastics and Composites, February 1, 2007; 26(3): 251 - 268. [Abstract] [PDF]

				R. M. Vauhini, V. Srinivasan, V. S. Panchagavi, N. Karthik, R. Suresh, L. Srikanth, and A. Vanaja Heat Transfer Studies on Glass Epoxy Composite Laminates - Effects of Heating Rate and Fiber Fraction Journal of Reinforced Plastics and Composites, September 1, 2006; 25(13): 1353 - 1365. [Abstract] [PDF]

				R. D. Sudduth Simplified Modeling of the Dynamic Gel Time and/or the Dynamic Gel Temperature for a Thermosetting Resin or Composite Journal of Composite Materials, June 1, 2003; 37(11): 985 - 1009. [Abstract] [PDF]

				Z. L. Yang and S. Lee Heating Cycle Design for Thick Composite Laminates Using Curing Processes for Thin Laminates Journal of Reinforced Plastics and Composites, November 1, 2002; 21(17): 1543 - 1560. [Abstract] [PDF]

				H. Li, R. Foschi, R. Vaziri, G. Fernlund, and A. Poursartip Probability-Based Modelling of Composites Manufacturing and Its Application to Optimal Process Design Journal of Composite Materials, August 1, 2002; 36(16): 1967 - 1991. [Abstract] [PDF]

				K. A. Olivero, H. J. Barraza, E. A. O'Rear, and M. C. Altan Effect of Injection Rate and Post-Fill Cure Pressure on Properties of Resin Transfer Molded Disks Journal of Composite Materials, August 1, 2002; 36(16): 2011 - 2028. [Abstract] [PDF]

				T. E. Meink, S. Huybrechts, and M. -H. H. Shen Processing Induced Warpage of Filament Wound Composite Cylindrical Shells Journal of Composite Materials, May 1, 2002; 36(9): 1025 - 1047. [Abstract] [PDF]

				A. Johnston, R. Vaziri, and A. Poursartip A Plane Strain Model for Process-Induced Deformation of Laminated Composite Structures Journal of Composite Materials, August 1, 2001; 35(16): 1435 - 1469. [Abstract] [PDF]

				D. W. Radford and T. S. Rennick Separating Sources of Manufacturing Distortion in Laminated Composites Journal of Reinforced Plastics and Composites, May 1, 2000; 19(8): 621 - 641. [Abstract] [PDF]

				C. M. Lawrence, D. V. Nelson, T. E. Bennett, and J. R. Spingarn An Embedded Fiber Optic Sensor Method for Determining Residual Stresses in Fiber-Reinforced Composite Materials Journal of Intelligent Material Systems and Structures, October 1, 1998; 9(10): 788 - 799. [Abstract]

				S. Yi and H. H. Hilton Effects of Thermo-Mechanical Properties of Composites on Viscosity, Temperature and Degree of Cure in Thick Thermosetting Composite Laminates during Curing Process Journal of Composite Materials, April 1, 1998; 32(7): 600 - 622. [Abstract]

				P. Hubert and A. Poursartip A Review of Flow and Compaction Modelling Relevant to Thermoset Matrix Laminate Processing Journal of Reinforced Plastics and Composites, March 1, 1998; 17(4): 286 - 318. [Abstract]

				A. S. Fine and G. S. Springer Design of Composite Laminates for Strength, Weight, and Manufacturability Journal of Composite Materials, December 1, 1997; 31(23): 2330 - 2390. [Abstract]

				M. R. Brinkman and H. Sarrazin Effects of Processing Temperature and Layup on Matrix Cracking Journal of Reinforced Plastics and Composites, December 1, 1995; 14(12): 1252 - 1258. [Abstract]

				M. Hojjati and S. V. Hoa Model Laws for Curing of Thermosetting Composites Journal of Composite Materials, September 1, 1995; 29(13): 1741 - 1761. [Abstract]

				S. C. Mantell, P. R. Ciriscioli, and G. Almen Cure Kinetics and Rheology Models for ICI Fiberite 977-3 and 977-2 Thermosetting Resins Journal of Reinforced Plastics and Composites, August 1, 1995; 14(8): 847 - 865. [Abstract]

				H. Sarrazin, B. Kim, S.-H. Ahn, and G. S. Springer Effects of Processing Temperature and Layup on Springback Journal of Composite Materials, July 1, 1995; 29(10): 1278 - 1294. [Abstract]

				J. H. Choi and D. G. Lee Expert Cure System for the Carbon Fiber Epoxy Composite Materials Journal of Composite Materials, June 1, 1995; 29(9): 1181 - 1200. [Abstract]

				S.R. White and C. Kim A Simultaneous Lay-Up and in situ Cure Process for Thick Composites Journal of Reinforced Plastics and Composites, May 1, 1993; 12(5): 520 - 535. [Abstract]

				T.E. Twardowski, S.E. Lin, and P.H. Geil Curing in Thick Composite Laminates: Experiment and Simulation Journal of Composite Materials, January 1, 1993; 27(3): 216 - 250. [Abstract]

				R. Pitchumani and S.-C. Yao Non-Dimensional Analysis of an Idealized Thermoset Composites Manufacture Journal of Composite Materials, January 1, 1993; 27(6): 613 - 636. [Abstract]

				G. D. Smith and A. Poursartip A Comparison of Two Resin Flow Models for Laminate Processing Journal of Composite Materials, January 1, 1993; 27(17): 1695 - 1711. [Abstract]

				E. P. Scott and J. V. Beck Estimation of Thermal Properties in Carbon/Epoxy Composite Materials during Curing Journal of Composite Materials, January 1, 1992; 26(1): 20 - 36. [Abstract]

				P. R. Ciriscioli, Qiuling Wang, and G. S. Springer Autoclave Curing -- Comparisons of Model and Test Results Journal of Composite Materials, January 1, 1992; 26(1): 90 - 102. [Abstract]

				S. C. Mantell and G. S. Springer Manufacturing Process Models for Thermoplastic Composites Journal of Composite Materials, January 1, 1992; 26(16): 2348 - 2377. [Abstract] [PDF]

				S.R. White and H.T. Hahn Process Modeling of Composite Materials: Residual Stress Development during Cure. Part I. Model Formulation Journal of Composite Materials, January 1, 1992; 26(16): 2402 - 2422. [Abstract] [PDF]

				S.-Y. Lee and G. S. Springer Filament Winding Cylinders: I. Process Model Journal of Composite Materials, December 1, 1990; 24(12): 1270 - 1298. [Abstract]

				R. Dave A Unified Approach to Modeling Resin Flow During Composite Processing Journal of Composite Materials, January 1, 1990; 24(1): 22 - 41. [Abstract]

				J. P. Coulter and S. I. Guceri Resin Impregnation During the Manufacturing of Composite Materials Subject to Prescribed Injection Rate Journal of Reinforced Plastics and Composites, May 1, 1988; 7(3): 200 - 219. [Abstract]

				Jianmao Tang and G. S. Springer Effects of Cure and Moisture on the Properties of Fiberite 976 Resin Journal of Composite Materials, January 1, 1988; 22(1): 2 - 14. [Abstract]

				S.-Y. Lee and G. S. Springer Effects of Cure on the Mechanical Properties of Composites Journal of Composite Materials, January 1, 1988; 22(1): 15 - 29. [Abstract]

				J. T. Burwasser and G. S. Springer Electrothermal Curing of Filament Wound Composite Cylinders Journal of Composite Materials, January 1, 1988; 22(1): 81 - 100. [Abstract]

				J.-M. Tang, W. I. Lee, and G. S. Springer Effects of Cure Pressure on Resin Flow, Voids, and Mechanical Properties Journal of Composite Materials, January 1, 1987; 21(5): 421 - 440. [Abstract]

				Woo Il Lee and G. S. Springer A Model of the Manufacturing Process of Thermoplastic Matrix Composites Journal of Composite Materials, January 1, 1987; 21(11): 1017 - 1055. [Abstract]

				W. I. Lee, P. R. Ciriscioli, M. R. Dusi, and D. R. Peterson Cure Process Model of Organic Matrix Composites in the Presence of Vapor Release Journal of Reinforced Plastics and Composites, January 1, 1986; 5(1): 3 - 8. [Abstract]

				Woo Il Lee and G. S. Springer Microwave Curing of Composites Journal of Composite Materials, January 1, 1984; 18(4): 387 - 409. [Abstract]